SITO PCAP
SITO PCAP
SITO PCAP
Previous
Next
SITO PCAP
SITO PCAP
SITO PCAP
Previous
Next

PROJECTED CAPACITIVE touchScreen (SITO GLASS)

Multi- Touch

5”~24”

0
models

Standard product

PROJECTED CAPACITIVE touchScreen (SITO GLASS)

Multi- Touch

5”~24”

0
models

Standard product

Features

SITO PCAP product has excellent performance and is suitable for high-end market applications

It also has greatest advantages such as:

  • High reliability: As ITO single-sided design, circuits and conductive areas are not exposed on the contrary, they are completely covered and protected between the cover glass.
  • Narrow Boarder Design: It can achieve the design of narrow border, and also with better stability

With good optical performance

AG, AR, AF, or AB coating is available for customized requirement

Multi-touch Interaction

It enables input through multiple touch points, lines and gestures.

High Sensitivity

High Transmittance

Exceed 90%

High Durability

Surface Hardness > 6H

Features

DITO PCAP product has comprehensive solutions from small size to large size

It also has greatest advantages such as:

  • High reliability: As ITO single-sided design, circuits and conductive areas are not exposed on the contrary, they are completely covered and protected between the cover glass.
  • Narrow Boarder Design: It can achieve the design of narrow border, and also with better stability

With good optical performance

AG, AR, AF, or AB coating is available for customized requirement

Multi-touch Interaction

It enables input through multiple touch points, lines and gestures.

High Sensitivity

High Transmittance

Exceed 90%

High Durability

Surface Hardness > 6H

Operating Principle & Structure

The SITO PCAP touch panel is based on the concept of capacitive touch panel. With two adding sets of transparent wires (X, Y) and driving lines that are in different layers, a capacitor node will be formed at the intersection due to they are perpendicular to each other. When the current passes through one of the wires, the other wire and the electronic circuit will connect while the change of the capacitance value is detected. During operation, the controller sequentially supplies current to the drive lines in different layers, so a specific electric field will form between each node and the wire. When a finger or touch medium approaches, the controller can quickly detect the change in capacitance between the node and the wire, and then confirm the position of the touch. Since the transparent wire forms a three-dimensional electric field on the panel that is different from the surface capacitance, the touch can still be operated without actual contact, so we can say, PCAP technology is with the Z-axis resolution capability.

Operating Principle & Structure

The SITO PCAP touch panel is based on the concept of capacitive touch panel. With two adding sets of transparent wires (X, Y) and driving lines that are in different layers, a capacitor node will be formed at the intersection due to they are perpendicular to each other. When the current passes through one of the wires, the other wire and the electronic circuit will connect while the change of the capacitance value is detected. During operation, the controller sequentially supplies current to the drive lines in different layers, so a specific electric field will form between each node and the wire. When a finger or touch medium approaches, the controller can quickly detect the change in capacitance between the node and the wire, and then confirm the position of the touch. Since the transparent wire forms a three-dimensional electric field on the panel that is different from the surface capacitance, the touch can still be operated without actual contact, so we can say, PCAP technology is with the Z-axis resolution capability.

Application

Gtouch SITO projected capacitive touch panels are widely used in aerospace, military, navigation, industrial control, medical and other fields, and we guarantee continuous supply for 3-5 years. We keep investing lots of efforts on product research and development to provide our customer a comprehensive product line. Meanwhile, we are able to offer suitable solutions for customized requirement, and to improve and enhance the value of our products.

Application

Gtouch SITO projected capacitive touch panels are widely used in aerospace, military, navigation, industrial control, medical and other fields, and we guarantee continuous supply for 3-5 years. We keep investing lots of efforts on product research and development to provide our customer a comprehensive product line. Meanwhile, we are able to offer suitable solutions for customized requirement, and to improve and enhance the value of our products.

Standard Specification

Stackup Top Layer Cover Glass – SOCA – Bottom Layer SITO Sensor Glass
Hardness >=6H pencil
Transparency 85%
Operating Force <10g
Linearity ±1.5mm
FPC Type FPC with Chip on Board (COB)
Chip On FPC (COF)
Operating Temperature / Humidity -10℃~ 70℃ / 20%~ 80%
Storage Temperature / Humidity -40℃~ 80℃ / 20%~ 90%
Durability 100 million Times
Warranty 1 year

* Product specifications may be affected by material selection, stackup changes, and enhanced design, please contact us if you have special requirements.

Standard Specification

Stackup Top Layer Cover Glass – SOCA – Bottom Layer SITO Sensor Glass
Hardness >=6H pencil
Transparency 85%
Operating Force <10g
Linearity ±1.5mm
FPC Type FPC with Chip on Board (COB)
Chip On FPC (COF)
Operating Temperature / Humidity -10℃~ 70℃ / 20%~ 80%
Storage Temperature / Humidity -40℃~ 80℃ / 20%~ 90%
Durability 100 million Times
Warranty 1 year

* Product specifications may be affected by material selection, stackup changes, and enhanced design, please contact us if you have special requirements.

Standard Products

Size Model Sensor OD Active Area Thickn. Controller Touch IC Interface Tail P.
5”w GP-050G-FOG01 117.00 x 66.44 111.50 x 63.20 0.4 COF SIS I2C Down
5.5”w GP-055G-FOG01 128.11 x 73.83 122.35 x 69.43 0.4 COF EETI I2C Down
7.8”w GP-078G-FOG01 205.38 x 67.40 192.08 x 61.40 0.7 COF EETI I2C Right
8” GP-080G-FOG01 171.00 x 132.05 165.00 x 124.50 0.7 COF SIS USB/I2C Left
8”w GP-080G-FOG02 184.25 x 118.27 174.22 x 109.64 0.4 COF EETI I2C Left
10.1”w GP-101G-FOG01 229.70 x 151.55 219.00 x 137.60 0.7 COF EETI USB/I2C Down
10.4” GP-104G-FOG01 227.70 x 172.40 215.20 x 162.40 0.7 COF SIS/EETI USB/I2C Right
10.4” GP-104G-FOG02 225.20 x 173.40 215.20 x 162.40 0.7 COF EETI USB/I2C Up
11.6”w GP-116G-FOG01 270.50 x 163.50 258.32 x 146.18 0.7 COB EETI USB/I2C/UART Down
12.1” GP-121G-FOG01 262.64 x 204.74 251.50 x 190.00 1.1 COF EETI USB/I2C Down
12.1” GP-121G-FOG02 262.30 x 199.80 251.50 x 190.00 1.1 COB EETI USB/I2C/UART Left
12.1”w GP-121G-FOG03 276.70 x 179.60 264.00 x 166.00 0.7 COB/COF EETI USB/I2C Down
13.3”w GP-133G-FOG01 311.60 x 185.00 296.20 x 167.60 0.55 COF EETI USB Down
13.3"w GP-133G-FOG02 301.80 x 184.40 295.76 x 167.24 0.55 COF EETI USB/I2C Down
15” GP-150G-FOG01 325.48 x 252.48 307.00 x 231.00 0.55/1.1 COF EETI USB/I2C Down
15” GP-150G-FOG02 321.00 x 244.50 307.80 x 231.70 1.1 COF EETI USB/I2C Left
15.6"w GP-156G-FOG01 356.00 x 205.20 345.95 x 195.30 0.7 COB/COF EETI USB/I2C/UART Down
15.6"w GP-156G-FOG02 362.80 x 215.00 348.30 x 197.80 0.7 COF EETI USB/I2C Left
17” GP-170G-FOG01 356.00 x 286.50 341.92 x 274.34 1.1 COB EETI USB/I2C/UART Left
17.3"w GP-173G-FOG01 395.10 x 231.90 383.90 x 216.90 1.1 COB EETI USB/I2C/UART Down
18.5"w GP-185G-FOG01 430.80 x 255.00 414.80 x 235.50 0.7 COF EETI USB/I2C Down
19” GP-190G-FOG01 394.70 x 322.70 379.40 x 304.10 0.7 COB EETI USB/I2C/UART Up
19"w GP-190G-FOG02 442.24 x 278.65 413.50 x 259.90 0.7 COB EETI USB/I2C/UART Down
20.1” GP-201G-FOG01 426.00 x 324.80 411.00 x 309.00 0.7 COB EETI USB/I2C/UART Down
21.5"w GP-215G-FOG01 493.60 x 290.20 481.20 x 272.70 0.7 COB EETI USB/I2C/UART Down
23.8"w GP-238G-FOG01 540.18 x 313.06 529.64 x 299.06 0.7 COB EETI USB/I2C/UART Down
24"w GP-240G-FOG01 545.94 x 317.30 535.40 x 303.00 0.7 COB EETI USB/I2C/UART Down

Standard Products

Size Model Sensor OD Active Area Thickn. Controller Touch IC Interface Tail P.
5”w GP-050G-FOG01 117.00 x 66.44 111.50 x 63.20 0.4 COF SIS I2C Down
5.5”w GP-055G-FOG01 128.11 x 73.83 122.35 x 69.43 0.4 COF EETI I2C Down
7.8”w GP-078G-FOG01 205.38 x 67.40 192.08 x 61.40 0.7 COF EETI I2C Right
8” GP-080G-FOG01 171.00 x 132.05 165.00 x 124.50 0.7 COF SIS USB/I2C Left
8”w GP-080G-FOG02 184.25 x 118.27 174.22 x 109.64 0.4 COF EETI I2C Left
10.1”w GP-101G-FOG01 229.70 x 151.55 219.00 x 137.60 0.7 COF EETI USB/I2C Down
10.4” GP-104G-FOG01 227.70 x 172.40 215.20 x 162.40 0.7 COF SIS/EETI USB/I2C Right
10.4” GP-104G-FOG02 225.20 x 173.40 215.20 x 162.40 0.7 COF EETI USB/I2C Up
11.6”w GP-116G-FOG01 270.50 x 163.50 258.32 x 146.18 0.7 COB EETI USB/I2C/UART Down
12.1” GP-121G-FOG01 262.64 x 204.74 251.50 x 190.00 1.1 COF EETI USB/I2C Down
12.1” GP-121G-FOG02 262.30 x 199.80 251.50 x 190.00 1.1 COB EETI USB/I2C/UART Left
12.1”w GP-121G-FOG03 276.70 x 179.60 264.00 x 166.00 0.7 COB/COF EETI USB/I2C Down
13.3”w GP-133G-FOG01 311.60 x 185.00 296.20 x 167.60 0.55 COF EETI USB Down
13.3"w GP-133G-FOG02 301.80 x 184.40 295.76 x 167.24 0.55 COF EETI USB/I2C Down
15” GP-150G-FOG01 325.48 x 252.48 307.00 x 231.00 0.55/1.1 COF EETI USB/I2C Down
15” GP-150G-FOG02 321.00 x 244.50 307.80 x 231.70 1.1 COF EETI USB/I2C Left
15.6"w GP-156G-FOG01 356.00 x 205.20 345.95 x 195.30 0.7 COB/COF EETI USB/I2C/UART Down
15.6"w GP-156G-FOG02 362.80 x 215.00 348.30 x 197.80 0.7 COF EETI USB/I2C Left
17” GP-170G-FOG01 356.00 x 286.50 341.92 x 274.34 1.1 COB EETI USB/I2C/UART Left
17.3"w GP-173G-FOG01 395.10 x 231.90 383.90 x 216.90 1.1 COB EETI USB/I2C/UART Down
18.5"w GP-185G-FOG01 430.80 x 255.00 414.80 x 235.50 0.7 COF EETI USB/I2C Down
19” GP-190G-FOG01 394.70 x 322.70 379.40 x 304.10 0.7 COB EETI USB/I2C/UART Up
19"w GP-190G-FOG02 442.24 x 278.65 413.50 x 259.90 0.7 COB EETI USB/I2C/UART Down
20.1” GP-201G-FOG01 426.00 x 324.80 411.00 x 309.00 0.7 COB EETI USB/I2C/UART Down
21.5"w GP-215G-FOG01 493.60 x 290.20 481.20 x 272.70 0.7 COB EETI USB/I2C/UART Down
23.8"w GP-238G-FOG01 540.18 x 313.06 529.64 x 299.06 0.7 COB EETI USB/I2C/UART Down
24"w GP-240G-FOG01 545.94 x 317.30 535.40 x 303.00 0.7 COB EETI USB/I2C/UART Down

Customized Products

Couldn’t find suitable product? We are glad to provide customized solution for you.

Please refer to the chart below, these are common modified specifications.

Common standard materials selections:
ITEM Component Name (description) Specifications
1 Cover Glass (Thickness) 0.55mm / 0.7mm / 1.1mm / 1.8mm / 2.8mm
2 Optical Artworks AG / AR / AF / AB
3 SITO Sensor Glass (Thickness) 0.4mm / 0.55mm / 0.7mm / 1.1mm / 1.8mm
4 Flexible cable (Type) FPC
5 Flexible cable (Length)
6 Adhesive 3M VHB / TESA
7 Sizes 5”~24 Customized OD / VA / AA
8 Specify TAIL outlet location Left / Right / Up / Down
9 IC Chip EETI / SIS
10 Controller Type COB / COF

Customized Products

Couldn’t find suitable product? We are glad to provide customized solution for you.

Please refer to the chart below, these are common modified specifications.

Common standard materials selections:
ITEM Component Name (description) Specifications
1 Cover Glass (Thickness) 0.55mm / 0.7mm / 1.1mm / 1.8mm / 2.8mm
2 Optical Artworks AG / AR / AF / AB
3 SITO Sensor Glass (Thickness) 0.4mm / 0.55mm / 0.7mm / 1.1mm / 1.8mm
4 Flexible cable (Type) FPC
5 Flexible cable (Length)
6 Adhesive 3M VHB / TESA
7 Sizes 5”~24 Customized OD / VA / AA
8 Specify TAIL outlet location Left / Right / Up / Down
9 IC Chip EETI / SIS
10 Controller Type COB / COF

Customized Enhanced Product (Optional)

To achieve the high efficiency of touch panel, our SITO PCAP product is also able to adopt with the following enhanced technology. 

EMI Shielding

To meet high-end market needs, such as military standard applications, we can provide professional EMI shielding solutions.

UV Resistant Design

For outdoor application requirements, long-term exposure to the UV environment may cause potential damage to the surface or the coating of the touch panel, which might affect the appearance and the function of it. UV-resistant design can effectively reduce the issue caused by UV exposure.

Vandal Proof Design

To meet safety regulation requirements, products with vandal proof design are provided. The glass substrate of the touch panel must meet the vandal proof specification when it is broken. Ensuring that the fragments will not splash out and injure people when the glass is cracked.

Optical Requirement Design

According to some specific optical application, we can use these solutions to achieve clear vision, low reflections, and high penetration.

Low Reflection
Sun Light Readable
Viewing Angle Restriction

Customized Enhanced Product (Optional)

To achieve the high efficiency of touch panel, our SITO PCAP product is also able to adopt with the following enhanced technology. 

EMI Shielding

To meet high-end market needs, such as military standard applications, we can provide professional EMI shielding solutions.

UV Resistant Design

For outdoor application requirements, long-term exposure to the UV environment may cause potential damage to the surface or the coating of the touch panel, which might affect the appearance and the function of it. UV-resistant design can effectively reduce the issue caused by UV exposure.

Vandal Proof Design

To meet safety regulation requirements, products with vandal proof design are provided. The glass substrate of the touch panel must meet the vandal proof specification when it is broken. Ensuring that the fragments will not splash out and injure people when the glass is cracked.

Optical Requirement Design

According to some specific optical application, we can use these solutions to achieve clear vision, low reflections, and high penetration.

Low Reflection
Sun Light Readable
Viewing Angle Restriction
Value-added service

eGalaxTouch controller

Accessory

LCM/LCD Module

LCM+Touch (air bonding)

LCM+Touch (optical bonding)

To get a Quatation or more information, Please feel free to conact us !